"Effects of Cathode Inlet Relative Humidity on PEMFC Durability during Startup–Shutdown Cycling: II. Diagnostic Study"

J.H. Kim, E.A. Cho*, J.H. Jang, H.-J. Kim, T.-H. Lim, I.-H. Oh, J. J. Ko, I.-J. Son J. Electrochem. Soc. (2010), 157 (5), B633-B642

"Development of a 600 W Proton Exchange Membrane Fuel Cell Power System for the Hazardous Mission Robot"

S.Y. Lee, I.-G. Min, H.-J. Kim, S.-W. Nam, J. Lee, S.J. Kim, J.H. Jang, E.A. Cho, K.H. Song, S.-A. Hong, T.-H. Lim* J. Fuel Cell Sci. Technol (2010), 7(3), 031006:1-031006 :7

"The effects of Nafion ionomer content in PEMFC MEAs prepared by a catalyst-coated membrane (CCM) spraying method"

K.H. Kim, K.Y. Lee*, H.-J. Kim, E.A. Cho, S.Y. Lee, T.-H. Lim, S.-P. Yoon, I.C. Hwang, J.H. Jang* Int. J. of Hydrogen Energy (2010), 35 (5), 2119-2126

"Development of a Durable PEMFC Startup Process by Applying a Dummy Load: II. Diagnostic Study"

J.H. Kim, E. A. Cho*, J.H. Jang, H.-J. Kim, T.-H. Lim, I.-H. Oh, J. J. Ko, I.-J. Son J. Electrochem. Soc. (2010), 157 (1), B118-B124

"Effects of Cathode Inlet Relative Humidity on PEMFC Durability during Startup–Shutdown Cycling: I. Electrochemical Study"

J.H. Kim, E. A. Cho*, J.H. Jang, H.-J. Kim, T.-H. Lim, I.-H. Oh, J. J. Ko, S. C. Oh J. Electrochem. Soc. (2010), 157 (1), B104-B112

"Complex Capacitance Analysis of Ionic Resistance and Interfacial Capacitance in PEMFC and DMFC Catalyst Layers"

J.H. Jang, S. Jeon, J.H. Cho, S.-K. Kim, S.Y. Lee, E.A. Cho, H.-J. Kim, J. Han, T.-H. Lim* J. Electrochem. Soc. (2009), 156 (11), B1293-B1300

"Sulfonated Poly(ether sulfone)-Based Catalyst Binder for a Proton-Exchange Membrane Fuel Cell"

N. Nambi Krishnan, H.-J. Kim*, J.H. Jang, S.Y. Lee, E.A. Cho, I.-H. Oh, S.-A. Hong, T.-H. Lim Journal of applied polymer science (2009), 113 (4), 2499-2506

"Development of a Durable PEMFC Startup Process by Applying a Dummy Load: I. Electrochemical Study"

J.H. Kim, E. A. Cho*, J.H. Jang, H.-J. Kim, T.-H. Lim, I.-H. Oh, J. J. Ko, S. C. Oh J. Electrochem. Soc. (2009), 156 (8), B955-B961

"Effects of curing condition of solution cast Nafion membranes on their PEMFC performance"

S. Vengatesan, E.A. Cho*, H.-J. Kim, T.-H. Lim KJChE (2009), 26 (3), 679-684

"Fuel cell performance of polymer electrolyte membrane based on hexafluorinated sulfonated poly(ether sulfone)"

N. Nambi Krishnan, H.-J. Kim*, J.H. Jang, E.A. Cho, S.Y. Lee, T.-H. Lim, S.-A. Hong Polymer bulletin (2009), 62 (4), 457-468

"High dispersion platinum catalyst using mesoporous carbon support for fuel cells"

S. Vengatesan, H.-J. Kim, S.-K. Kim, I.-H. Oh*, S.-Y. Lee, E.A.Cho, H.Y. Ha, T.-H. Lim Electrochimica Acta (2008), 54 (2), 856-861

"Pt-CeO2/C anode catalyst for direct methanol fuel cells"

M. Aulice Scibioh, S.-K. Kim, E.A. Cho, T.-H. Lim, S.-A. Hong, H. Y. Ha* Applied Catalysis (2008), 84 (3-4), 773-782

"Effects of MEA Fabrication Method on Durability of Polymer Electrolyte Membrane Fuel Cells"

M. Prasanna, E.A. Cho*, T.-H. Lim, I.-H. Oh Electrochimica Acta (2008), 53 (16), 5434-5441

"Development of shut-down process for a proton exchange membrane fuel cell"

H.-J. Kim, S. J. Lim, J. W. Lee, I.-G. Min, S.-Y. Lee, E.A. Cho, I.-H. Oh, J. H. Lee, S.-C. Oh, T.-W. Lim, T.-H. Lim* J. of Power Sources (2008), 181 (2), 814-820

"Water removal characteristics of proton exchange membrane fuel cells using a dry gas purging method"

S.-Y. Lee, S.-U. Kim, H.-J. Kim, J. H. Jang, I.-H. Oh, E.A. Cho, S.-A. Hong, J.-J. Ko, T.-W. Lim, K.-Y. Lee, T.-H. Lim* J. of Power Sources (2008), 180 (2), 784-790